Radio Control & Intercom via Your Smart Device
Use the RS-M500 app (for iOS™/Android™) to remotely control Smart device the IC-M510E through Wi-Fi®. Up to three smart devices can be used as a wireless microphone or remote controller in substitute for a simple microphone. Intercom function between your smart device and the radio is also available.
Integrated AIS Receiver
With its integrated AIS receiver* or external NMEA sentence (third party AIS receiver, transponder), the IC-M510E can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.
Simplified Navigation Function
The Navigation function guides you to a specified waypoint or AIS target. You can assign up to 100 destinations as waypoints.
Interface BOX for NMEA 2000™ and Hailer
Wide Viewing Angle Colour TFT LCD
The colour TFT LCD provides nearly a 180-degree viewing angle. The wide display has high-resolution characters and function icons. The night mode screen ensures good readability in low light conditions.
Provides Clear, Loud Audio
The IC-M510E’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio.
AIS Target Call with MA-510TR
Other Features
- Effortlessly switch Day and Night display modes with the DISP key
- Active Noise Canceling
- NMEA 0183/HS connectivity, NMEA 2000™ (CT-M500 required)
- Integrated GNSS receiver (Selectable from either internal receiver or use optional UX-241 GNSS antenna)
- IP68 advanced waterproofing (1 m depth of water for 60 minutes)
- Automatic Foghorn function (CT-M500 required)
- Voice Scrambler with optional UT-112A
- AquaQuake™ prevents audio degradation from a water-logged speaker
- Supplied speaker-microphone, HM-205RB can be connected to the rear panel
- External speaker connection
- Controlled with COMMANDMIC™ HM-195 or HM-229 series
- Supports 4-digit channels
General Specifications
| IC-M510E | |||
|---|---|---|---|
| Frequency range | TX | 156.025–161.425 MHz*3 | |
| RX | 156.300–161.925 MHz*3 | ||
| DSC | 156.525 MHz | ||
| AIS1, 2*1 | 161.975, 162.025 MHz | ||
| Usable channels | INT, USA, ATIS*2 channels | ||
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC) 16K0G2B (AIS)*1 | ||
| Power supply requirement | 13.8 V DC (10.8–15.6 V DC) | ||
| Current drain | TX 25 W output | 5.0 A | |
| RX Max. audio | 4.0 A (with HM-195) | ||
| Operating temperature range | –20°C to +60°C; –4°F to +140°F | ||
| Antenna impedance | 50 Ω | ||
| Weight (approx.) | 750 g; 1.7 lb (Not including microphone) | ||
Transmitter Specifications
| IC-M510E | |
|---|---|
| Output power (at 13.8 V DC) | 25 W, 1W |
| Max. frequency deviation | ±5 kHz |
| Frequency error | ±0.5 kHz |
| Spurious emissions | Less than 0.25 μW (at 25 W) |
| Residual modulation | More than 40 dB |
| Adjacent channel power | More than 70 dB |
Receiver Specifications
| IC-M510E | |||
|---|---|---|---|
| Sensitivity (at 20 dB SINAD) DSC (1% BER) | –5 dBμ –1 dBμ emf | ||
| Adjacent channel selectivity DSC (1% BER) | More than 75 dB More than 73 dBμ emf | ||
| Spurious response DSC (1% BER) | More than 75 dB More than 73 dBμ emf | ||
| Intermodulation DSC (1% BER) | More than 75 dB More than 68 dBμ emf | ||
| Hum and noise | More than 40 dB | ||
| Audio output power (at 10% distortion) | 15 W typ. with a 4 Ω external speaker | ||
Wi-Fi® Specifications
| IC-M510E | |
|---|---|
| Wireless LAN standard | IEEE802.11 b/g/n |
| Authentication and Encryption | WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) |
| Channels | 1 to 13 (2.4 GHz band)*4 |
| Output power | Less than 10 mW/MHz |
Download IC-M510E Manual
Click here to download ICom IC-M510E VHF Radio Manual
Would you like to know more?
Please complete our short form below to let us know the details of your enquiry
Reviews
There are no reviews yet.