Raymarine Quantum 2 CHIRP Radar
Introducing Raymarine Quantum 2 Radar. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges.
Using advanced Doppler processing, the system instantly highlights moving radar contacts and colour codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas.
Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD.
Features
- Doppler moving target display allows for superior situational awareness at-a-glance
- Fully automatic MARPA target tracking, along with manual MARPA mode
- Adjustable TrueTrails target history shows the motion history of moving contacts
- CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation
- 24-mile range for early detection of traffic, navigation aids, landfall and weather
- Immediate awareness – Quantum starts up and is ready to go in seconds
- Superior interference rejection eliminates noise from other radars
- Simplified installation with Wi-Fi or thin wire network connectivity
- Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners
- Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars
- Safe emissions – mount Quantum anywhere onboard
- Low power consumption for extended battery life under sail
HOW DOPPLER RADAR WORKS
Microwave energy waves are bounced off of a distant target, just like conventional radar.
Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted.
For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases.
For outbound targets, the frequency drops as the returning echoes spread out as its range increases.
Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets.
Raymarine Quantum 2 CHIRP Radar Specifications
GENERAL
Dimensions: Diameter | Height | 541.0 mm | 209.5 mm |
Weight: | 5.6 kg |
Supply voltage: | Either 12 V dc or 24 V dc nominal Minimum: 10.8 V dc | Maximum: 31.2 V dc |
Power consumption: | Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W |
Waterproofing: | IPX6 |
Operating temperature range: | -10°C to +55°C |
Storage temperature range: | -25°C to +70°C |
Additional storage conditions: | Store upright; do not block vents on underside |
Humidity: | Up to 95% at 35°C |
Maximum wind speed: | 100kts |
TRANSMITTER
Type: | X-band solid-state transmitter with pulse compression technology |
Transmit frequency: | 9354 MHz to 9446 MHz |
Peak power output: | 20W |
Duplexer: | Circulator |
Pulse widths (3 dB): | 40 ns to 14.7 |
Chirp lengths: | Chirp lengths: 400 ns to |
Pulse reptition frequency: | 2083 Hz |
Chirp bandwidth: | Up to 32MHz |
Standby mode: | Scanner rotation – OFF | Scanner transmission – OFF | Wi-Fi link – ON |
Radar Type: | Quantum 2 with Doppler |
MFD Compatibility | Axiom, Axiom Pro, Axiom XL, eS Series and gS Series |
Perfect for | Sailboats, RIBs, and smaller powerboats |
Type | Solid State CHIRP Pulse Compression with Doppler target tracking |
Range Performance | 24NM |
Performance | Lightweight and easy to install. Excellent short and long range performance. Detect targets as close as 18ft |
Automatic Bird Mode | No |
MARPA Target Tracking | Yes |
Would you like to know more?
Please complete our short form below to let us know the details of your enquiry
Reviews
There are no reviews yet.